Our Filling machine are widely used for drinks,liquor,soy sauce,juice ,milk,lotion,etc. And we have two type of machine for customer to choose.One is 1.5L/min 100℃,and the other is 3L/min 60℃. And they both can be matched the conveyor to prove the production efficiency.
Maximum flow Rate
Max Absorption Distance
Filling Volume Range
Diameter of Filling Nozzle
Control panel function description
1.When the red light is on, it means the smart sensor function and the foot switch function are available. You can connect smart sensor switch line or foot switch line to the control port.
2. When the green light is on, it means the pump is working, and the green light is off, it means the pump has stopped working. It is also a jog function button. Click once to fill
3. Yellow light: It is a manual switch that can set the fill time and volume, and then press the yellow button to fill continuously
4.POWDER:Press the light to turn on and turn off the device
5.SENSORS:Press the light to turn on/turn off the sensor,for automatic induction filling operation and stop.
6.INCHING:Press and hold the light to filling and release the light to stop filling.
7.DOWN and UP:
Filling speed: press DOWN and UP arrow
Acceleration and deceleration to control the motor output speed
Adjustable range: 00-99
00 is the minimum speed, the smaller the number, the slower the speed
99 is the maximum speed, the higher the number, the faster the speed
Use scenario: You can effectively control the liquid flow rate to prevent excessively fast flow rate
8. SET MOVE ADD&UNIT:
Filling time: this item sets the pump running time
Click the SET button to enter the filling time setting
Press the ADD & UNIT key to increase the number, the number increases, 0-9 cycles;
Press MOVE to move right one bit, adjustable range: 00.0-99.9